Watch: Southwest Plane Narrowly Avoids Disastrous Collision Thanks to Pilot’s Incredible Runway Maneuver

On February 25,2025,a near-collision incident ⁢involving a Southwest Airlines flight occurred at Chicago’s Midway International Airport.‍ Southwest Flight 2504, ​traveling from Omaha to⁣ Chicago, had to execute a go-around maneuver ⁣as a‌ private jet, identified as Flexjet 560, taxied onto the ⁢runway just as the passenger plane was‍ preparing ‌to land. The Southwest pilots’ rapid decision​ prevented what could have ‍been a serious accident. ‌

Air traffic control had ‌instructed the ⁢Flexjet pilot to hold short of the runway,⁣ but the instruction⁤ was misunderstood, ⁢leading the jet to cross the runway in ​front of the descending southwest⁢ aircraft.The pilots of the Southwest flight recognized the danger, informed the control tower of their go-around, and safely landed shortly afterward.

Transportation Secretary Sean Duff has stated⁤ that the National Transportation Safety Board (NTSB) and the Federal Aviation Administration (FAA) are investigating‌ the incident and emphasized the importance of pilots‍ adhering to air traffic control instructions. This incident comes on the heels ​of several serious aviation accidents ‌in recent⁢ weeks.


The quick response of a Southwest Airlines flight crew Tuesday prevented what appeared to be a certain collision from happening with another plane on the runway on which it was to land.

Southwest Flight 2504 from Omaha, Nebraska, to Chicago’s Midway International Airport was forced to perform a go-around maneuver when a private jet taxied out onto the runway as the passenger jet was coming in for a landing.

Video of the incident showed the Southwest plane about to touch down when it suddenly popped back up into the air.

Ahead on the runway was a plane identified as Flexjet 560, according to CNN.

It was a Bombardier Challenger 350, which was headed to Knoxville, Tennessee, according to FlightRadar24.

Air traffic control instructed the private jet to hold short of Runway 31 Center, according to audio from LiveATC.net.

The pilot incorrectly repeated back the instructions he had been given and indicated he was going to cross the Southwest jet’s runway, prompting the air traffic controller to tell him, “Flexjet 560, negative! Cross 31 Left, hold short Runway 31 Center.”

The Southwest pilot saw the situation unfolding and informed the tower he was going around.

The controller responded, “West 2504, uh, Roger that. Climb, maintain 3,000.”

The pilot could later be heard asking, “How did that happen?” but the tower did not respond as it continued to give instructions to other pilots.

A Southwest spokesperson told CNN via , “The crew followed safety procedures and the flight landed without incident,” adding, “Nothing is more important to Southwest than the safety of our customers and employees.”

Transportation Secretary Sean Duff responded to the incident with a post on X, saying, “The @NTSB and @FAANews are investigating the Chicago Midway International Airport incident. I will provide more updates once I have them.”

He added, “However, it is imperative that pilots follow the instructions of air traffic controllers. If they do not, their licenses will be pulled.”

The incident comes after a series of fatal plane accidents over the past month, including two in Arizona, as well as others in Toronto, Canada; outside Nome, Alaska; Philadelphia, Pennsylvania, and another in which an American Airlines passenger jet collided with a U.S. Army helicopter in Washington, D.C. on Jan. 29.




Advertise with The Western Journal and reach millions of highly engaged readers, while supporting our work. Advertise Today.



" Conservative News Daily does not always share or support the views and opinions expressed here; they are just those of the writer."
*As an Amazon Associate I earn from qualifying purchases

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Articles

Sponsored Content
Back to top button
Available for Amazon Prime
Close

Adblock Detected

Please consider supporting us by disabling your ad blocker